How to start with the Power switch module

This guide contains all the basic notions you will need to use the Power Switch module.

Power switch module category


Actuators modules are able to act on the physical world.

How to use your Power Switch module using Pyluos

To control your Power Switch module you have to connect it in a Luos network and connect this network through a communication module to Pyluos.

Then you can access to your module and control it.

This module can electrically open and close a circuit. You can get the state or set a state to the power switch.

To get the state of the module, use the command:

To set the state of the module, use the command:

True closes the circuit, while False closes it.